Cart

Your cart is empty

Microflex Series Overhead Gooseneck (Black, Cardioid, In-line Preamp)

Shure

Microflex Series Overhead Gooseneck (Black, Cardioid, In-line Preamp)

SKU: 663964 · Model: MX202B/C

$314.03$359.00
In Stock (9 available)
1
Free shipping on orders over $150
Authorized dealer — genuine products
  • Interchangeable cartridges that provide an optimal polar pattern choice for each application
  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Balanced, transformerless output for increased immunity to noise over long cable runs
  • Supplied stand-mount adapter for portable applications
  • Accurate sound reproduction with minimum RF interference or electromagnetic hum
Weight: 0.95 lbsDims: 9.9″ × 4.7″ × 3.2

Product Details

MX202 Microflex�Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.<br/><br/>Frequency Response<br/>50 to 17,000 Hz<br/><br/>Output Impedance<br/>180 ohms actual (EIA rated at 150 ohms)<br/><br/>Sensitivity (At 1,000 Hz, open circuit voltage*)<br/>Cardioid: -35.0 dBV/Pa (17.8 mV)<br/>All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL<br/><br/>Maximum SPL (1 kHz at 1% THD, 1 k ohm load)<br/>Cardioid: 124.2 dB<br/>All values +6 dB at 0 gain<br/><br/>Equivalent Output Noise (A-weighted)<br/>Cardioid: 28.0 dB SPL<br/><br/>Signal to Noise Ratio (referenced at 94 dB SPL)<br/>Cardioid: 66.0 dB<br/><br/>Dynamic Range at 1 k ohm load<br/>96.2 dB<br/>100 dB at 0 gain<br/><br/>Common Mode Rejection<br/>45.0 dB minimum<br/><br/>Preamplifier Output Clipping Level (1% THD)<br/>-6.0 dBV (0.5 V)<br/>-12 dBV at 0 gain<br/><br/>Polarity<br/>Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.<br/><br/>Power Requirements<br/>11 to 52 Vdc phantom, 2.0 mA<br/><br/>Environmental Requirements<br/>Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)<br/>Relative Humidity: 0 to 95%